# Logo position on login screen

**URL:** <https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514>\
**Category:** Support\
**Created:** [5 September 2015 08:54 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514 "2015-09-05T08:54:11Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rob](https://qfcommunity.b-cdn.net/user_avatar/community.quickfile.co.uk/rob/32/336_2.png) [@Rob](https://community.quickfile.co.uk/u/Rob)\
**Post date:** [5 September 2015 08:54 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514/1 "2015-09-05T08:54:11Z")

</div>

How do I centre my logo on the logon screen?

Thanks, Rob

---

<div class="post-metadata">

**Author:** ![Parker1090](https://qfcommunity.b-cdn.net/user_avatar/community.quickfile.co.uk/parker1090/32/7684_2.png) [@Parker1090](https://community.quickfile.co.uk/u/Parker1090)\
**Post date:** [5 September 2015 09:31 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514/2 "2015-09-05T09:31:48Z")

</div>

Hi Rob,

I have this as the CSS code. Adjust the URL for the image and the sizes to match yours and you should be good.

I would copy and paste but I’m on my phone and it doesn’t allow me! Hope that’s OK for you though!

 ![](https://qfassets.b-cdn.net/original/3X/6/3/6313ee4b9ca17c0acd0dbf6d31f5b8c6259246c6.png)

**Edit** I don’t believe you need both height and min-height (same with width) - same with width. Think that may have been me playing and not changing it back. But give it a go!

Hope that helps!

---

<div class="post-metadata">

**Author:** ![Lurch](https://qfcommunity.b-cdn.net/letter_avatar_proxy/v4/letter/l/a9a28c/32.png) [@Lurch](https://community.quickfile.co.uk/u/Lurch)\
**Post date:** [5 September 2015 09:41 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514/3 "2015-09-05T09:41:09Z")

</div>

> [@Parker1090](#):
>
> I would copy and paste but I’m on my phone and it doesn’t allow me!

Or do you mean you don’t know how? 😉

---

<div class="post-metadata">

**Author:** ![Parker1090](https://qfcommunity.b-cdn.net/user_avatar/community.quickfile.co.uk/parker1090/32/7684_2.png) [@Parker1090](https://community.quickfile.co.uk/u/Parker1090)\
**Post date:** [5 September 2015 09:44 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514/4 "2015-09-05T09:44:10Z")

</div>

Shhh, don’t tell everyone! 😉

It only seems to select a line at a time, and even then doesn’t give me the options (select all, cut, copy and paste). May just be my phone mind you

---

<div class="post-metadata">

**Author:** ![Rob](https://qfcommunity.b-cdn.net/user_avatar/community.quickfile.co.uk/rob/32/336_2.png) [@Rob](https://community.quickfile.co.uk/u/Rob)\
**Post date:** [5 September 2015 10:05 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514/5 "2015-09-05T10:05:10Z")

</div>

Many thanks, I believe this code is the exact same as I have already however my logo is off to the left, is it down to the size of the image? I wondered if there was a way to pad just the logo across? If I adjust the margin it sends everything to the right.

Where I might be going wrong is I have not adjusted the width and height to match the actual image size, I will try this first

Thanks again

Rob

---

<div class="post-metadata">

**Author:** ![Rob](https://qfcommunity.b-cdn.net/user_avatar/community.quickfile.co.uk/rob/32/336_2.png) [@Rob](https://community.quickfile.co.uk/u/Rob)\
**Post date:** [5 September 2015 16:22 UTC](https://community.quickfile.co.uk/t/logo-position-on-login-screen/8514/6 "2015-09-05T16:22:21Z")

</div>

Sorted, thanks for your help

Rob
